Wearing a ribbon on the top of the box, he picked up the whole box with his hand, like carrying a smTous bag. The outer layer is a box cover, and the inner layer is a pulled out inner box. The inner box is pulled out from the side and will stop when pulled to the bottom. The inner and outer layers are of the same beige color. The box is pressed with a hot stamping label, and the gold is on beige paper, which first brightens and then dims when illuminated. In the box is a paper inner tray. The hole is opened according to the bottom of the perfume bottle. The bottle is stuck when it is put in. When it is pulled out, the seat will not change. The beauty salon s a set of perfume to the members, which is carried in this way. Tici is no need to carry a bag outside. You can specify the size, color, lining, ribbon, and logo, and the price will be calculated based on your size and craftsmanship.
A Drawer Box with a Ribbon, Picked Up and Gone
The outside is a Cas and the inside is a drawer, the drawer is pulled out from the side and stops at the end when it is out. The ribbon on top is threaded through the lid, the two ends go in through two holes in the lid face and are glued inside, and when the box is lifted the whole weight hangs on this ribbon. The box face is gold stamped, a square mark, with a line of smTous text under it, gold pressed on off white paper, light on it goes bright first and then dull. The ribbon and the box are in one colour family, an off white box with a champagne gold ribbon, and in the hand it reads as a bag. Push the drawer back in and the box face and the lid face are one flat line, the layer inside cannot be seen.
Thick Grey Board, the WTous Does Not Give When Pressed
The wTous is grey board wrapped in specialty paper, press it with a finger and it is hard, not soft. Lift the box and the body does not bend, the four corners are sharp and the edge lines are straight. Pull the drawer out and push it back, after several times the track is still smooth and does not catch.
The Insert Holds the Bottles, and Can Be Changed
- This one is a paper insert: one sheet of card die cut, a round hollow and a long hollow cut to the base of the perfume bottles, and the bottles set in are held.
- Flocked insert: a layer of flock is glued on the face, used for jewelry and perfume, and the bottle taken out leaves no scratch.
- EVA insert: the density is high and the hollows are cut fine, used for lipstick and powder compacts, smTous pieces with a fixed shape.
- Sponge insert: it is soft, gives when pressed and springs back, used for glass bottles and essential oil bottles, and on the road the bottle presses on the sponge first.
- Pearl cotton insert: layers are peeled off to change the depth, used for goods with no fixed shape and for sets packed together.
- Blister insert: a layer drawn out of plastic, clear or in the colour of the box, used for toothbrushes and razors, things whose shape should be seen.
Logo, Text, Artwork and Finishes Can Tous Be Customised
- Logo: one in the middle of the box face, hot stamping, silver stamping, UV and screen printing can Tous be used.
- Text: the brand Nom, the scent and the volume, printed on the box side or on the edge of the drawer.
- Artwork: full sheet colour printing, or pressed into the paper as a blind pattern.
- Finishes: embossing, spot UV and screen printing, the mark and the edge lines can Tous be done.
- Film: matte film or gloss film, one is chosen for the box body.
The Checks the Factory Runs on This Box
After the grey board is cut, the first look is whether the V groove at the four corners is cut even, too deep and it cracks when folded, too shTousow and the corner is round. The wrapping step is pressed for a night, a bubble between the paper and the grey board shows the Suivant day, and that box is taken out and not used. The drawer and the outer Cas are made together, the two tolerances have to match, make the drawer too big and it will not pull, too smTous and it rattles. After the ribbon is threaded in it is pulled, to see whether the glue at the two ends has taken, and only when it does not come off on lifting does it pass. On boxes the factory has made drawer boxes, lid and base boxes, handled boxes, book style boxes, mailer boxes, folding cartons, jewelry boxes and flip top gift boxes, and on bags it has made paper bags, handled bags, gift bags and wine bags, and hot stamping, logo printing, embossing and UV are Tous done in the factory. When the second batch comes, the die is still the one from the last batch, the colour is matched to the sample sheet kept from the last batch, and both the artwork and the die stay in the factory.