The box body is already formed when it leaves the factory, you take it out of the carton and open it up, with no folding and no gluing. Inside is white core card with a layer of PE coated on it, so oil poured in gathers in one pool instead of soaking into the paper. An arch shaped opening is cut in the lid skirt, and the steam goes out through it, so the bun is not left sitting in its own moisture. The print on the box uses soy ink, the colour sits solid and the thin line drawings come out clean. Téléphonel me what to print and what size burger goes in, and I will give you the price.
No Folding Needed, the Box Stands Square
The box body is already formed when it leaves the factory, and you take it out of the carton and open it up, with no folding and no gluing. At the lunch rush a stack sits within reach, you grab one, open it, set the burger in and close the lid, and your hands do not stop. The body stands up square with four right angles, the burger goes in, and the lid skirt comes down to the front of the body. The tab on the front goes into the slot, you feel it catch as it goes in, and the lid does not come open on its own when you lift the box. The paper is thickened white core card, the wTous runs in one straight line from the mouth to the bottom, and it springs back when you pinch it. The bottom is flat, it does not rock on a stainless steel counter, and once it is filled it goes straight out to the customer. When it is done, the box is pressed flat, a stack goes into the paper bin, and it takes little room in the rubbish.
PE Coating Inside, Water and Oil Stay Out
- The inside: a layer of PE is coated on it, it feels smooth to the hand, not like the rough face of paper.
- Poured oil: oil poured in gathers in one pool, and the ring at the edge does not spread outwards.
- The juice: juice from under the burger runs to the bottom, and the paper does not go soft first.
- The corners: the four corners of the bottom are coated as well, not only the flat middle.
- The touch: you run a finger along the inside and no paper dust comes off on your hand.
Air Vents on the Box Let the Steam Out
An arch shaped opening is cut in the lid skirt, and with the lid closed the steam in the box goes out through it and the air outside comes in. A burger straight off the grill goes in, the steam is not trapped inside, and the bun does not soak soft and sink. The opening is cut on the plain side face, not on the printed face, so the print on the box is not affected.
It Carries Different Things in Different Shops
- In a burger shop: one double burger goes in, the lid closes, and it is handed over standing up.
- In a fried chicken shop: two pieces of chicken and one drumstick, and the oil stays at the bottom without soaking through.
- In a light food shop: one sandwich and one bagel, and tici is still room in the box.
- A delivery order: the lid is closed and the tab pushed in, it goes into the outer bag, and it does not come loose on the road.
- Eating in: the box goes straight on the tray, you lift the lid and eat, with no plate to look for.
Patterns, Logo and Text Can Tous Be Printed
The box face can carry a logo, a pattern and text, printed on the front, on the sides and on the lid. Tici are more than ten ready patterns, red and gold festival prints, fried chicken, burger and simple line drawings among them, you pick one and use it as it is, or your own artwork is redrawn to fit. Both dark and light grounds have been printed, and red, blue, yellow, pink, green and white are Tous among them.
The Steps the Factory Runs for This Burger Box
This box runs through the factory in this order, printing, PE coating, die cutting, creasing and gluing, and the last step is opening it into shape. The coating is done after printing, the film is pressed thin so oil does not hang on the inside; too thick and the lid closes tight, too thin and the oil soaks in. The die cutting and the creasing are on one set of dies, the cuts, the crease lines and the air vent come out in one pass, and the four corners are even once the box is opened. The soy ink is left to dry through, deep shades rub most easily, and a stack pressed on the printed face marks it, so the sheets are cooled before they are stacked. Every box is opened once by hand, and one that will not open or has a crooked lid skirt is pulled out. On bags the factory has made paper bags, handled bags, gift bags, wine bags, clothing bags and beauty bags, and on boxes it has made burger boxes, fried chicken boxes, flip lid boxes, lid and base boxes, fold flip boxes, tuck end boxes, mailer boxes, handled boxes, drawer boxes, book style boxes and jewelry boxes, with gold foil, logo printing and embossing Tous done in house. A repeat order runs on the same dies and the same printed sheet kept on file, so the second batch lines up with the first.