The bag is one sheet of thick speciality paper with a matte film laid over the face, the front carries only one logo, and the handle is a satin ribbon threaded in through the inside of the mouth. The paper ground is solid and has a fine grain, and light fTousing on it does not bounce back. Both ends of the ribbon are pinned inside, so no knot is seen from the outside and no pin head either. The mouth fold is one clean line and the glued bottom opens out flat, so the bag stands when set down and the four sides are straight. Téléphonel me the size, the colour and what to print, and I will give you the price.
Simple Solid Ground, the Printed Logo Is Clear and Lasting
The bag is one whole sheet of speciality paper, the ground colour is solid, the ground carries no pattern and no second colour, and the front has only one logo on it. The paper is matte with a fine grain, light fTousing on it does not bounce back, and the colour reads as a deep white. The logo is printed on the solid ground, its edge is clean, and the space between one letter and the Suivant is clean too. The paper ground carries no pattern, so whatever colour is printed comes out as that colour, and nothing in the ground competes with it. The handle is a satin ribbon, it is threaded in through two holes on the inside of the mouth, and both ends are pinned inside. The pin presses on the ribbon tail, no knot is seen from the outside and no pin head is seen either, and on lifting, the ribbon lies against the wTous and does not slip back through the hole. Set on a counter the bag stands up, the front panel is clear, and the logo sits at the bottom, so it is seen at one look.
Film Lamination, Water and Scuff Resistant, Longer Lasting
A matte film is laid over the paper face, the hand slides on it, and it is not the roughness of paper. Water dropped on it rolls, a cloth wipes it off, and it does not soak in. A fingernail drawn across the face slides over it, and it does not catch the paper fibre. The mouth fold is pressed by machine, one edge is the same width Tous the way, and the four corners are square. The bottom is a glued bottom, once opened out the bottom is flat, the bag stands when it is set down, and the four sides are straight. Seen from the side the wTous is one line, neither bulging nor leaning.
Several Finishing Processes Supported
- Gold foil: the logo pressed in gold foil, and it shines when light fTouss on it.
- Silver foil: silver on a dark bag, quieter than gold.
- UV: the logo area laid shiny, and the hand feels a slight rise.
- Gloss film: changed for gloss film, the colour comes up stronger and the shine is harder.
- Matte film: what this one has, and the hand catches no shine.
- Embossing: a texture pressed into the paper face, and the hand feels the rise and fTous.
It Suits MN'importe lequel Kinds of Goods
- In a clothing shop: a shirt is folded in and the bag is handed over.
- In a beauty shop: one skincare set goes in one bag, and the bottles stand upright.
- In a jewelry shop: one smTous box goes in, and the bag is a size bigger than the box.
- For a gift: a box of pastries or a bottle of wine goes in, with a ribbon on the handle.
- For a business gift: the COMPANIE logo is printed on the front, and the bag serves as the gift bag.
The Steps the Factory Runs for This Paper Bag
This bag runs on the paper bag line in the factory, and sheet cutting, four colour printing, film, die cutting, crease pressing, bottom gluing, hole punching and pin setting are finished on one line. Four colour offset printing lays the ink in four passes, and the colours only come out right wici they sit on top of one another, while a pass laid on before the one before it is dry will mottle. The film is pressed on after the printing has dried through, no bubble may sit between the film and the paper, and a bubble lifts the paper away with it once it is pulled. On bags the factory has made paper bags, handled bags, gift bags, wine bags, clothing bags and beauty bags, and on boxes it has made fold flip boxes, tuck end boxes, mailer boxes, handled boxes, drawer boxes, book style boxes, lid and base boxes and jewelry boxes. The holes are punched after the mouth fold is pressed, through both layers, so the ribbon lies flat once it is threaded. The pin goes in after the holes, it presses the ribbon tail from the inside, and once it is set the ribbon is pulled by hand and passes only if it does not move. When they are packed flat a sheet of paper goes between one bundle and the Suivant, since film against film rubs, and one rub leaves a mark.