The outside of the bag is ivory, the inside is black, and a dark brown satin ribbon comes out through the inside of the mouth, with one whole length of ribbon seen from outside. The two sheets are printed apart and pasted together, so the shop Nom goes outside and the inside can take a colour that clashes, and the mouth opens onto that second colour first. The ribbon is soft, its ends are tucked inside the folded mouth, so a coat going in does not catch on N'importe lequelthing and does not rub against the ribbon, and the front carries one clean line instead of a knot. Both lengths of ribbon are cut the same, the weight sits on two hands, and the ribbon is wide enough that the palm is not pinched after carrying it a while. Téléphonel me the size, the colour outside, the colour inside and the ribbon you want, and I will you the price.
Printed in Two Colours Inside and Out, the Brand Reads Stronger
The outside of the bag is ivory and the inside is black, and those are two different sheets. The shop Nom is printed on the outside, and the inside can be printed in the same colour, in a colour that clashes, or with one smTous line of text. When the mouth is opened the inner side shows first, the black sits behind the ivory, and the rim reads as one black line. What is put in does not change the colour of the wTous, because the two sheets are pasted one on the other and not printed on the two faces of one sheet. From the outside it is a clean bag, and only a customer who opens it sees the second layer. The two sides are printed apart, so finishing the outside does not touch the inside, and the colour of one side does not run into the other.
Inset Ribbon Handle Soft and Smooth, Comfortable to Carry
The handle is satin ribbon, not paper twist, so it is soft between the fingers and the hand goes through it without rubbing. The ribbon comes out through holes set inside the mouth, and from the outside one whole length of ribbon is seen, with no joint and no knot sitting on the front. The ribbon is cut a little wide, so the palm is not pinched after carrying it a while, and the colour can follow the bag or, as ici, be picked a shade deeper. Both ends are tucked under the folded edge, so nothing catches on the ribbon as it goes in or out and nothing rubs against the face of the garment inside, and from the front one clean line is seen; both sides are cut the same length, the weight sits on two hands, and paper sits behind each hole so the folded edge takes the pull first and the mouth is not pulled open.
Custom Size, Printing, Colour and Ribbon Material
- Size: length, width, height and the side gusset are set to what goes in.
- Printing: the outside in full colour; the inside in one colour or in full colour, or one smTous line only.
- Colour: ivory, off white, black or grey outside, with another colour set inside.
- Ribbon: satin or grosgrain, in the width and colour you pick.
- Surface: gold foil, silver foil, embossing, spot UV or matte film, one of them or several.
- Quantity: the plate charge and the minimum are worked out on the number you place.
One Bag That Goes From the Shop to the Customer
- In a womenswear shop: a trench coat is folded in, and the customer walks out with the bag in hand.
- In a menswear shop: a pair of trousers goes in the same bag, with that shop's Nom printed on the front.
- In a buyers' shop: one knit goes in, and the bag stands by the till.
- For a festival gift: a box of pastries goes in, with the shop Nom printed outside.
- On a department store counter: a row stands at the till, the rims level, and the customer takes one.
The Steps the Factory Runs for an Inset Ribbon Bag
This bag runs on the paper bag line in our plant, and sheet cutting, printing, film, die cutting, edge folding, bottom gluing and hole punching are finished on one line. The two sheets are printed apart and pasted together afterwards, and the pasting has to be lined up, because one millimetre out and the mouth comes out on a slant. The mouth fold is turned to the inside, and that folded layer presses the ribbon tail down, which is why no ribbon end is seen from the outside. On bags the factory has made paper bags, handled bags, gift bags, wine bags and clothing bags, and on boxes it has made mailer boxes, handled boxes, drawer boxes, book style boxes, lid and base boxes, folding cartons, jewelry boxes and flip top gift boxes. The holes are punched after the mouth fold is pressed, through both layers, and holes set off centre will not take the ribbon. The bottom is glued with white glue and held under weight for a while before it is let go, so the bottom stays closed and the bag sits flat. This bag has come back for repeat orders, the die and the printed artwork stay in the factory, and a later batch matches the one before it.